1、范圍
本標準規定了 2,4,6 三甲基苯甲酰基二苯基氧化膦(CAS 號:75980-60-8）的技術要求，試驗方法、檢驗規則以及標志、包裝、運輸、存儲，安全和有效期。
本標準適用于本公司生產和銷售的 APi-TPO。
分子式: C22H21O2P
相對分子質量:348.37(按 2014 年國際相對原子質量)

結構式:

2、 規范性引用文件
下列文件對于本文件的應用是必不可少的。凡是注日期的引用文件，僅注日期的版本適用于本文件。凡是不注日期的引用文件，其最新版本(包括所有的修改單)適用于本文件。GB190 危險貨物包裝標志
GB/T191 包裝儲運圖示標志
GB/T601 化學試劑標準滴定溶液的制備
GBT602 化學試劑雜質測定用標準溶液的制備
GB/T603 化學試劑試驗方法中所用制劑及制品的制備
GB/T6678 化工產品采樣總則
GB/T6682 分析實驗室用水規格和試驗方法
GB/T9969 工業產品使用說明書總則
GB/T16631 高效液相色法通則
GB/T21781 化學品的熔點及熔融范圍試驗方法毛細管法

3 、技術要求
3.1 外觀：本產品為淡黃色固體粉末或顆粒 3.2 產品質量指標應符合表一的要求。

質量要求

1、Range
This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, safety and expiration date of 2,4,6 Trimethylbenzoyl Diphenylphosphine Oxide (CAS No. 75980-60-8).
This standard applies to APi-TPO produced and sold by our company.
Molecular Formula: C22H21O2P
Relative molecular mass: 348.37 (according to the international relative atomic mass in 2014)
Structural formula.

2、 Normative references
The following documents are essential for the application of this document. Where a document is dated, only the dated version applies to this document. Where a cited document is not dated, the latest version (including all change orders) applies to this document. GB190 Dangerous Goods Packaging Marking
GB/T191 Graphic symbols for packaging, storage and transportation
GB/T601 Preparation of standard titration solutions for chemical reagents
GBT602 Preparation of standard solution for determination of impurities of chemical reagents
GB/T603 Preparation of preparations and products used in test methods for chemical reagents
GB/T6678 General rules for sampling chemical products
GB/T6682 Specification and test methods for water used in analytical laboratories
GB/T9969 General rules for the use of instructions for industrial products
GB/T16631 General Rules for High Performance Liquid Chromatography
GB/T21781 Chemicals melting point and melting range test method capillary method

3 、Technical requirement
3.1 Appearance: The product is light yellow solid powder or granule
3.2 The quality index of the product should meet the requirements of Table I.

Quality requirements